Skip to content

Accessories for PTP and NTP GPS Time Servers

Need an outdoor GPS antenna or a collar mount for it? Perhaps you’re looking for a double rack mount or an extra two-way splitter? No matter what kind of time server accessories you’re looking for, we’ve got you covered. We have everything you need! Take a look at TimeMachines’ NTP time server hardware below. These time server accessories are selected and manufactured from quality materials to ensure long-term, reliable, and exceptional performance. Whether you’re planning on upgrading your entire network time server rig or adding to your existing time server configuration, we have the equipment you’re looking for.

Check out our outdoor antenna installation guide HERE to make sure you have what you need for your installation.

Showing 1–16 of 22 results

  • RG-58 Cable, SMA (male) / Type-N (male)

    RG-58 Cable, SMA (male) / Type-N (male)

    Use this cable to connect the GPS Time Server to the lightning arrestor or directly to the antenna in a complete outdoor antenna installation for any of our GPS network time servers.

    – Gold-plated SMA connectors.
    – Shielded RG-58 cable.
    – Connects time server to the GPS antenna or lightning arrestor.
    – Indoor & outdoor use.
    – Approximate loss of 13 dB per 100 ft.

    Select options
    Quick View
  • TM2503A 10MHz and 1PPS Distribution Amplifier

    $279.99

    TM2503A 10MHz and 1PPS Distribution Amplifier

    $279.99

    In stock

    Add to Cart
    Quick View
  • Rack Mountable 0.5 inch POE NTP Clock

    $189.99

    Rack Mountable 0.5 inch POE NTP Clock

    $189.99

    The TM160 POE clock is a low profile clock based on the same hardware and software as our other NTP digital clock displays. The bright red digits are 0.5 inches tall. It is installed in the same case as any of our time servers, making it an ideal solution for a rack mount companion to those products. It can be mounted using the same 1U rack mount face plates that the TM1000, the TM2000, or the TM2500 use. Mount a single clock using the 760-022-000 plate, or mount a time server and a clock in a 1U space using the 760-023-000 dual rack mount plate. Its small size also makes it ideal as an interface to a campus wide bell system. It has the same relay output that our other displays have and all of the same versatility for alarm event setting through its web interface or using TM-Manager. The rack mount plate and relay connector is sold separately.

    In stock

    Add to Cart
    Quick View
  • front side of a wifi time machines network time server

    Rack Mountable 0.5 inch WiFi NTP Clock

    $229.99

    Rack Mountable 0.5 inch WiFi NTP Clock

    $229.99

    The TM160W WiFi clock is a low profile clock based on the same hardware and software as our other NTP digital clock displays. The bright red digits are 0.5 inches tall. It is installed in the same case as any of our time servers, making it an ideal solution for a rack mount companion to those products. It can be mounted using the same 1U rack mount face plates that the TM1000, the TM2000, or the TM2500 use. Mount a single clock using the 760-022-000 plate, or mount a time server and a clock in a 1U space using the 760-023-000 dual rack mount plate. Its small size also makes it ideal as an interface to a campus wide bell system. It has the same relay output that our other displays have and all of the same versatility for alarm event setting through its web interface or using TM-Manager. The WiFi clock supports both wired Ethernet and WiFi modes with an external 12V power supply. The rack mount plate and relay connector is sold separately.

    In stock

    Add to Cart
    Quick View
  • single rack mount for gps time servers

    Single Rack Mount for Time Servers

    $59.99

    Single Rack Mount for Time Servers

    $59.99

    The TimeMachines single rack mount is a great way to complete a professional 19″ rack installation of the TimeMachines GPS network time servers and the rack mountable NTP clock displays.

    View our DOUBLE RACK MOUNT!

    In stock

    Add to Cart
    Quick View
  • Double rack mount for gps time server

    Double Rack Mount for Time Servers

    $69.99

    Double Rack Mount for Time Servers

    $69.99

    The TimeMachines double rack mount is a great way to complete a professional 19″ rack installation of the TimeMachines GPS network time servers and the rack mountable NTP clock displays. A double rack mount is beneficial when two units are necessary to provide network time redundancy or display features for your installation.

    View our SINGLE RACK MOUNT!

    In stock

    Add to Cart
    Quick View
  • Outdoor Timing Antenna

    $124.99

    Outdoor Timing Antenna

    $124.99

    Link to: Outdoor Antenna Products Overview for GPS NTP Time Server

    The TW3142 is a high-gain GPS antenna specifically designed for applications in environments where high levels of nearout-of-band interfering signals can be expected. This antenna features a 40dB LNA gain to handle long cable runs.

    The TW3142 covers the GPS L1 and SBAS (WAAS, EGNOS & MSAS) frequency band and employs Tallysman’s unique Accutenna™ technology to provide excellent cross polarization rejection and greatly enhanced multipath rejection.  The TW3142 features a three (3) stage dual filtered LNA plus an additional SAW pre-filter to provide exceptional rejection of close out-of-band signals and additional protection against saturation by high level sub-harmonic and L-Band signals.

    The TW3142 housing has a permanent mount, IP67 compliant metal base, and an extended temperature range plastic radome, and is specifically designed to withstand the most challenging environmental conditions.  Two options for pole mounting are available an L-bracket (SKU#760-907-000) or a pipe mount (SKU#760-908-000).  Mount is not included with the antenna.

    – Dimensions: 2.6″ Base Diameter x 2.0″ Base to Top x 1.2″ Connector Extension
    – Connector: N, female (one – bottom fed).
    – Works with TimeMachines TM1000A, TM2000B, and the TM2500C
    – Outdoor Use

    Available on backorder

    Add to Cart
    Quick View
  • “L” Economy Mast Mount

    $19.99

    “L” Economy Mast Mount

    $19.99

    “L” Economy stainless steel mast mount for 760-906-000 GPS timing antennas.
    Clamps in picture are NOT included, but can be purchased at your local hardware store.

    In stock

    Add to Cart
    Quick View
  • Collar Mount for GPS Outdoor Timing Antenna

    $24.99

    Collar Mount for GPS Outdoor Timing Antenna

    $24.99

    This mount is used in conjunction with the 760-906-000 timing reference antenna for mounting on top of a pole up to 1.67″ in diameter.  Made of aluminum and includes two set screws to secure the mount to the pole.

    In stock

    Add to Cart
    Quick View
  • Lightning Arrestor 0-6 GHz

    $49.99

    Lightning Arrestor 0-6 GHz

    $49.99

    0-6 GHz Lightning Protector with N Jack to N Bulkhead Jack Connectors. Includes L Shaped Mounting Bracket.

    In stock

    Add to Cart
    Quick View
  • COAX-SEAL #104

    $8.99

    COAX-SEAL #104

    $8.99

    – Seals Coax fittings from moisture and corrosion.
    – Stays flexible at any temperature.
    – Fast and easy seal for all antenna connections.
    – Forms and seals over odd shapes

    In stock

    Add to Cart
    Quick View
  • 2 Way GPS Splitter

    $69.99

    2 Way GPS Splitter

    $69.99

    The TimeMachines GPS 2 Way Splitter allows using one antenna with two GPS Time Servers such as the TM1000/2000/2500. This passive device connects antenna amplifier power through one of the output ports to the antenna using the power provided by the time server. The second port is DC blocked. No changes in setup of the TimeMachines Time Servers are required to use this device. Compatible with other vendors GPS based time server products, see documentation for more information. Works great with the puck antennas provided with our time servers as well as our conical 40dB outdoor antenna. If there are multiple time servers co-located, this product can save running multiple antenna cables.

    In stock

    Add to Cart
    Quick View
  • 2 Way GPS Splitter with Power Injector

    $89.99

    2 Way GPS Splitter with Power Injector

    $89.99

    The TimeMachines GPS 2 Way Powered Splitter allows using one antenna with two GPS Time Servers such as the TM1000/2000/2500. The splitter function is passive with both ports DC blocked. The included 9V power supply is used to power the antenna amplifier for longer than 250ft cable runs with low signal loss cable. No changes in setup of the TimeMachines Time Servers are required to use this device. Compatible with other vendors GPS based time server products, see documentation for more information. If there are multiple time servers co-located, this product can save running multiple antenna cables.

    Use only with the TimeMachines conical 40dB outdoor antenna or other antennas rated to handle 9V DC.

    In stock

    Add to Cart
    Quick View
  • 4 Way GPS Splitter

    $79.99

    4 Way GPS Splitter

    $79.99

    The TimeMachines GPS 4 Way Splitter allows using one antenna with four GPS Time Servers such as the TM1000/2000/2500. This passive device connects antenna amplifier power through one of the output ports to the antenna using the power provided by the time server. The other three ports are DC blocked. No changes in setup of the TimeMachines Time Servers are required to use this device. Compatible with other vendors GPS based time server products, see documentation for more information. Works great with the puck antennas provided with our time servers as well as our conical 40dB outdoor antenna.  If there are multiple time servers co-located, this product can save running multiple antenna cables.

    In stock

    Add to Cart
    Quick View
  • 4 Way GPS Splitter with Power Injector

    $99.99

    4 Way GPS Splitter with Power Injector

    $99.99

    The TimeMachines GPS 4 Way Powered Splitter allows using one antenna with four GPS Time Servers such as the TM1000/2000/2500. The splitter function is passive with all ports DC blocked. The included 9V power supply is used to power the antenna amplifier for longer than 250ft cable runs with low signal loss cable. No changes in setup of the TimeMachines Time Servers are required to use this device. Compatible with other vendors GPS based time server products, see documentation for more information. If there are multiple time servers co-located, this product can save running multiple antenna cables.

    Use only with the TimeMachines conical 40dB outdoor antenna or other antennas rated to handle 9V DC.

    In stock

    Add to Cart
    Quick View
  • RG-58 Cable, Type N (male) / Type N (male)

    RG-58 Cable, Type N (male) / Type N (male)


    Use this cable to connect the GPS timing antenna/amplifier to the lightning arrestor in a complete outdoor antenna installation for any of our GPS network time servers.

    – Gold-plated SMA connectors.
    – Shielded RG-58 cable.
    – Connects lightning arrestor to the GPS antenna/amplifier.
    – Indoor & outdoor use.
    – Approximate loss of 13 dB per 100 ft.

    Select options
    Quick View
Scroll To Top